The Kiosk Fails to Open the Catalog Kiosk App and Jumps Back to the Sign-in Screen Asking for an Email Address

Have more questions? Submit a request
To determine the appropriate solution path, tap on the system tray in the bottom right hand corner of the screen (where the time is displayed). When you access the system tray, the top of the menu should read: “This device is managed by”


Once you locate this screen, click on the appropriate link:


Getting Started

My device DOES NOT say This Device Is Managed by Wondersign

1. Sign in to the Chromebox using the following credentials:

Enterprise Enrollment Login Credentials


Password: wondersign


2. Once logged in, tap on the time in the bottom right to have the system tray appear. Once it appears, click the Settings menu.


3. At the top of the settings menu, click the blue link that says About Chrome OS.


4. On the following screen, click Check for and apply updates.


5. When completed, a confirmation will appear above “Check for and apply updates” that states “Your Chromebox is up to date.”


6. Restart the kiosk, and the Catalog Kiosk application should load and launch automatically.



My device DOES say This Device Is Managed by Wondersign


Requirements/Tools Needed:

  • USB Keyboard
  • Paperclip

1. Turn off the Chromebox by holding the power button down for 5 seconds. When complete the power light will be off.



2. Connect a USB Keyboard to the front of the Chromebox, and put a paperclip into the recovery button hole.


3. Press down the recovery button with the paperclip while turning on the Chromebox.


Please Note: the image above is for an Asus brand Chromebox. The power button may look slightly different with a different model but will be located on the front or top of the Chromebox.


4. As the screen boots up, a yellow/orange exclamation point will appear. Now, press Ctrl+D on the keyboard.


5. When the below screen appears, press the recovery button with the paperclip again.


6. When the below screen appears, press the spacebar on the keyboard, then press Enter to confirm.


7. The screen below will appear, and the Chromebox will reboot.


8. Once powered on, the Chromebox will display the first setup screen. Press the Tab key on the keyboard to navigate to the "Select a Network" section. After configuring your WiFi connection, select Continue.

Please Note: If you are using a wired LAN connection, there is no need to choose a WIFi network; the Chromebox will connect automatically.


9. Please read the Google OS Terms carefully, and then select Accept and Continue.


10. Once the login screen appears (see below), choose an option to get to the enrollment screen:

  • Press Ctrl+Alt+E.

  • Click More options - Enterprise enrollment (not available on Chromebook tablets)


11. Once on the Enterprise Enrollment Screen, enter the login credentials for the Wondersign Catalog Kiosk application.

Enterprise Enrollment Login Credentials

User Name: Password: wondersign


12. After successful enterprise enrollment, the below screen will appear. Press Enter to proceed.


13. The Chromebox will automatically install and launch the Wondersign application.


14. The Kiosk’s “Attractor Screen” will now be displayed, and the Kiosk should be fully operational.

If a 6-digit pairing code appears, see How to Activate Device.

Articles in this section

Was this article helpful?
0 out of 0 found this helpful