Skip to main content
All CollectionsInstallation & SetupWondersign Kiosk
How to Install & Adjust the Peerless Stand for a 32" or Larger Touchscreen
How to Install & Adjust the Peerless Stand for a 32" or Larger Touchscreen
Updated this week

For full assembly instructions, visit Peerless Stand Setup Instructions

Requirements/Tools Needed:

  • Phillips Head Screwdriver

Getting Started

1. Loosen the bolts indicated below. The left bolt in the image below must be fully removed, and the bolt to the right needs only to be loosened. Repeat for both sides of the stand.

1_Loosen_the_boilts_indicated_below..png

2. Pull the touchscreen down until it is at the desired angle, then tighten both bolts into place. Please Note: The ideal angle will put the left screw in the middle hole (4 of 7).

2_Pull_the_touchscreen_down_until_it_is_at_desired_angle.png
2.2_Desired_Angle.png
Did this answer your question?